Acta Scientific Dental Sciences

Research Article Volume 10 Issue 12

Reliability of Björk’s Structural Signs Compared with Vertical Cephalometric Measurements: A Cross-Sectional Study

Douaa Chkhayess*, Hiba Kabak, Youssef Mounchit and Farid El Quars

Department of Dentofacial Orthopedics, Faculty of Dental Medicine, Hassan II University of Casablanca, Casablanca, Morocco

*Corresponding Author: Douaa Chkhayess, Department of Dentofacial Orthopedics, Faculty of Dental Medicine, Hassan II University of Casablanca, Casablanca, Morocco.

Received: October 28, 2026; Published: November 16, 2026


Background: Mandibular growth rotation influences vertical facial development and orthodontic diagnosis. Björk described structural signs on lateral cephalograms that may reflect anterior or posterior mandibular rotation, but their discriminatory value varies across studies and population-specific cephalometric data remain limited.

Objective: To compare the reliability of variations in Björk’s structural signs of mandibular rotation with variations in vertical cephalometric measurements.

Methods: This retrospective descriptive cross-sectional study analyzed 30 pretreatment lateral cephalograms from patients attending the Dentofacial Orthopedics Department of the Center for Dental Consultation and Treatment, Ibn Rochd University Hospital, Casablanca. Three normodivergent subjects were excluded from the structural-sign analysis, leaving 27 patients (23 hyperdivergent and 4 hypodivergent). Tracings were performed manually on acetate with a 0.5-mm pencil by a single experienced operator. Seven structural signs were assessed. Statistical analyses were performed using Student’s t-test, with statistical significance set at p < 0.05.

Results: Seventeen patients (56.7%) were female and 13 (43.3%) were male; 23 (76.7%) were hyperdivergent, 4 (13.3%) hypodivergent, and 3 (10.0%) normodivergent. Significant associations with vertical pattern were observed for mandibular canal shape (p = 0.017), mandibular angle (p < 0.001), lower mandibular border morphology (p = 0.007), cortical bone thickness (p = 0.029), and lower facial height (p < 0.001). Condylar-neck direction (p = 0.613) and symphysis thickness (p = 0.422) were not significant. Compared with Björk-Steiner references, SN/Ba, SN/Frankfort, SN/GoGn, SN/ANS-PNS, ANS-PNS/GoGn, and chin angle differed significantly, whereas overbite, ANS-PNS/OcS, GoGn/OcI, and gonial angle did not.

Conclusion: In this small Moroccan orthodontic sample, five Björk structural signs were significantly associated with hyperdivergent versus hypodivergent patterns, whereas condylar-neck direction and symphysis thickness did not. The findings support selective use of structural signs as adjunctive morphological information rather than as stand-alone predictors of future growth rotation.

Keywords: Björk Structural Signs; Mandibular Growth Rotation; Vertical Facial Pattern; Cephalometry; Hyperdivergence; Hypodivergence

 

References

  1. Björk A. “Prediction of mandibular growth rotation”. American Journal of Orthodontics6 (1969): 585-599.
  2. Björk A. “Variations in the growth pattern of the human mandible: longitudinal radiographic study by the implant method”. Journal of Dental Research1 Pt 2 (1963): 400-411.
  3. Ricketts RM. “Cephalometric synthesis”. American Journal of Orthodontics9 (1960): 647-673.
  4. von Bremen J and Pancherz H. “Association between Björk’s structural signs of mandibular growth rotation and skeletofacial morphology”. Angles of Orthodontics4 (2005): 506-509.
  5. Leslie LR., et al. “Prediction of mandibular growth rotation: assessment of the Skieller, Björk, and Linde-Hansen method”. American Journal of Orthodontics and Dentofacial Orthopedics6 (1998): 659-667.
  6. Diwakar R., et al. “Three-dimensional assessment of temporomandibular joint morphology and facial asymmetry in individuals with different vertical skeletal growth patterns”. International Journal of Environmental Research and Public Health 2 (2023): 1437.
  7. Reis AS., et al. “3D analysis of maxillomandibular morphology in hyperdivergent and hypodivergent individuals: a cross-sectional study”. Orthodontics and Craniofacial Research4 (2023): 687-694.
  8. Gousman J., et al. “Evaluating mandibular symphysis bone density according to various skeletal patterns with cone-beam computed tomography”. Orthodontics and Craniofacial Research 24 (2021): 70-77.
  9. Chen H., et al. “Comparison of mandibular cross-sectional morphology between Class I and Class II subjects with different vertical patterns: based on cone-beam computed tomography images and statistical shape analysis”. BMC Oral Health 21 (2021): 238.
  10. Akbulut S and Bayrak S. “Evaluation of mandibular alveolar bone in patients with different vertical facial patterns: a cross-sectional cone-beam computed tomography study”. Journal of Orofacial Orthopedics 2 (2024): 89-97.
  11. Ousehal L., et al. “Vertical dimension of occlusion: cephalometric norms for a Moroccan population”. Journal of Orofacial Orthopedics 1 (2016): 39-44.
  12. Oth O., et al. “Impact of the mandibular divergence on the position of the inferior alveolar nerve and mylohyoid nerve: a computed tomography study and its relevance to bilateral sagittal split osteotomy”. Surgical and Radiologic Anatomy3 (2013): 241-247.
  13. Manabe A., et al. “A cephalometric analysis of the antegonial notch in relation to the direction of mandibular growth”. Scientific Report 14 (2024): 23241.
  14. Gómez Y., et al. “Associations between mandibular symphysis form and craniofacial structures”. Oral Radiology 2 (2018): 161-171.
  15. Hasani M., et al. “Three-dimensional evaluation of the cortical and cancellous bone density and thickness for miniscrew insertion: a cone-beam computed tomography study of interradicular areas of adults with different facial growth patterns”. BMC Oral Health 23 (2023): 753.
  16. Franco CS., et al. “A comparison of 2- and 3-dimensional mandibular superimposition techniques against Björk’s structural superimposition method”. American Journal of Orthodontics and Dentofacial Orthopedics3 (2021): e253-e273.
  17. Santander P., et al. “Comprehensive 3D analysis of condylar morphology in adults with different skeletal patterns: a cross-sectional study”. Head and Face Medicine 16 (1 (2020): 33.
  18. Oliveira RDS., et al. “Association between the anatomy of the mandibular canal and facial types: a cone-beam computed tomography analysis”. International Journal of Dentistry 2018 (2018): 5481383.
  19. Selvaraj M., et al. “Mandibular canal angle, length and curvature in the three facial growth patterns and their association with vertical dysplasia indicators in adult patients: a retrospective cross-sectional 2D cephalometric study”. International Orthodontics4 (2025): 101026.
  20. Linjawi AI., et al. “Mandibular symphysis dimensions in different sagittal and vertical skeletal relationships”. Saudi Journal of Biological Sciences1 (2021): 280-285.
  21. Oh J., et al. “Assessment of hard and soft tissue thickness at mandibular symphysis in skeletal Class III patients with different vertical patterns”. Orthodontics and Craniofacial Research 27 (6 (2024): 886-892.
  22. Eto VM., et al. “Bone thickness and height of the buccal shelf area and the mandibular canal position for miniscrew insertion in patients with different vertical facial patterns, age, and sex”. Angles of Orthodontics 2 (2023): 185-194.
  23. Rehman SA., et al. “Association of gonial angle on panoramic radiograph with the facial divergence on lateral cephalogram”. Journal of College of Physicians and Surgeons Pakistan4 (2020): 355-358.

Citation

Citation: Douaa Chkhayess., et al. “Reliability of Björk’s Structural Signs Compared with Vertical Cephalometric Measurements: A Cross-Sectional Study". Acta Scientific Dental Sciences 10.12 (2026): 09-17.

Copyright

Copyright: © 2026 Douaa Chkhayess., et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.




Metrics

Acceptance rate30%
Acceptance to publication20-30 days
Impact Factor1.278

Indexed In





News and Events


  • Publication Certificate
    Authors will be provided with the Publication Certificate after their successful publication
  • Last Date for submission
    Authors are requested to submit manuscripts on/before November 19, 2026, for the upcoming issue of 2026.

Contact US









ff

© 2024 Acta Scientific, All rights reserved.